Skip to main content

Full text of "MacBook Pro 15" Retina Display Mid 2012 Repair Manual"

Installing MacBook Pro 1 5" Retina Display Mid 201 2 AirPort/Camera Cable 



/ffXft 



Installing MacBook Pro 15 
Retina Display Mid 2012 



AirPort/Camera Cable 



Written By: Brett Hartt 



SUMMARY 

Prereq only. 



Step 1 — AirPort/Camera Cable 




• Use the tip of a spudger to pry the 
three AirPort antenna cables 
straight up off of their sockets on 
the AirPort board. 



©iFixit — CC BY-NC-SA 



www.iFixit.com 



Page 1 of 3 



Installing MacBook Pro 1 5" Retina Display Mid 201 2 AirPort/Camera Cable 



Step 2 




• Use the tip of a spudger to push 
the camera cable connector out of 
its socket on the logic board. 

• Be sure to push parallel 
to the board, pushing first 
on one side, then the other to 
"walk" the connector out of its 
socket. 



Step 3 




• Insert the flat end of a spudger underneath the rubber heat sink cover on the right fan. 

• Slide the spudger underneath the length of the cover, releasing the adhesive. 

• Lift the cover and flip it back so that you can access the cables underneath. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 2 of 3 



Installing MacBook Pro 1 5" Retina Display Mid 201 2 AirPort/Camera Cable 



Step 4 




• Use your fingers to pull the AirPort/Camera cables up off the fan. 

♦ The cables are adhered to the fan, so peel them up carefully to prevent ripping 
any. 

• Carefully de-route the cables from the plastic cable guide. 



a 



To reassemble your device, follow these instructions in reverse order. 



This document was last generated on 2012-10-31 07:54:01 AM. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 3 of 3